Medical Oxygen Gas Plant contains the air compressor, air cooling and dryer unit, PSA oxygen generator, oxygen tank, and PLC control panel. All the accessories are wholly testified before installation. With the latest technology, the plant started alarming maintenance services. Get the oxygen plant service at affordable rates for any purposes such as medical, gas-flame operations, etc.
How does it work?
The air compressor collects the air(mixture of gases) directly from the atmosphere and then separates the mixture through zeolite molecular sieves. After separated gases get is cooled using a dryer. Then the step is to set them in tanks for distribution purposes
Capacity: 1Nm3/hr to 200Nm3/hr
Purity : Up to 95%
Pressure: Up to 2.5 TO 3.5 Bar without oxygen Booster
Dew Point: up to (-) 40°C
This Process consists of 2 Vessels filled with Molecular Sieves (MS) and Activated Alumina. Clean Compressed Air at30°C temperature is passed through one Vessel and oxygen comes out as product Gas. The exhaust Gas (Nitrogen) is discharged back into atmosphere. Upon saturation of the Molecular Sieves bed, the process switches oxygen Generation to the other bed by automatic valves while allowing the saturated bed to undergo regeneration. by depressurization and purging to atmospheric pressure. This is 2 vessels keep cycling alternately in oxygen production and regeneration ensuring oxygen Gas is continuously available to your Process.
Continuous, Supply and Guaranteed Purity.
When you installed the PSA Oxygen Gas Plant on –site, you are in control of your Oxygen Supply if you are currently using cylinder, than there is always dependence on your suppliers and there is no guarantee of the purity of oxygen being supplied. With PSA System, you can be sure of the purity of oxygen with the included oxygen purity analyzer
|Product||Medical Oxygen Gas Plant|
|Flow Rate||25 LPM|
|Working Pressure||200 Kgf/cm2|
|Type Of Compressor||Screw Air Compressor|
|Technique||PSA And Sieve Technology|
|Manufacture By||PSG Engineering Co|