1. Palladium content: 0.3%, 0.5%, 1.0%
2. Palladium catalyst Grade: Industrial grade
3. Palladium catalyst Granularity: 100mesh(or following your demand)
4. Moisture: ≤ 3.0%
5. Features: Good hydrogenation conversion, selectivity and stable performance
The product is already activated and could be loaded and used directly.
Whether should the deoxy genate be pre-heated (to 50-80 ° C) or not depends on the oxygen content in raw gas.
The working temperature should be lower than 450 ° C
Appearance: Coconut shell flake
Pd content: 0.48-0.52
Particle size %: ≥ 95
Crushing strength: ≥ 40
Specific surface area: 1000-1300
Bulk density g/ml: 0.4-0.5
Abrasion %: ≤ 1
Reaction recovery %: ≥ 99
|Palladium content(wt)||%||0.3-0.5- 1|
Nitrogen or argon separated from air could be purified up to 1 ppm oxygen content after on deoxygenating step.
The oxygen content can be reduced to 0.1 ppm.
Palladium catalyst Application: It's a kind of high efficient deoxidizer, Can be used for hydrogen, nitrogen and argon,
krypton etc. Various gas the depth purification. Widely used in metallurgy, chemical industry, light industry,
Avoid damping and any adsorption of water or organic substance before use. Otherwise it must be regenerated.
Pay Mode Terms: ,D/A,T/T (Bank Transfer)
Port of Dispatch: Any Port in India
Delivery Time: Order and Requirement
Packaging Details: Order and Requirement
|Features||Safe To Use, Precisely Processed, Longer Shelf Life|
|Storage||Cool & Dry Place|
|Grade Standard||Technical Grade|
|Melting Point||1,554.9 °C|